top of page
  • Prevent foam or knock down foam created when mixing products.

  • Approved for food contact.

  • Water-dilutable; effective in VERY low concentrations.

  • Sold in 1 gal. box; 4 one-quart spray bottles per box.

BLOW OUT can be used in aqueous medium, either neat or diluted with cool water. Diluted material should be used as soon as possible. Spray as needed to control foaming. 100 parts of active silicone per million parts of foamer is recommended, however, in many cases 1 to 10 ppm is sufficient.
Store between 41°F and 95°F. If freezing occurs, performance should not be diminished; completely thaw then thoroughly mix before using. Approved for food contact.

Proprietary Silicone Emulsion 10%
Derived from non-ionic emulsifier

Appearance: White Liquid
Odor: Typical
Water Solubility: Complete
Density: 2.01 LB/QT (68°F), 1.00 KG/L (20°C)
pH: 3.5
Freezing Point: N/A
Boiling Point: 95°F (35°C)
bottom of page